|
|
|
|
|
|
|
|
|
|
|
|
|
|
Test Strips: Alkalinity, Total as CaCO3, 0-240 ppm
|
Test Strips: pH 1-12
|
Bacteria Tests: Aerobic Bacteria Test Kit, 25/pk
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Orthophosphate Test: Hach Color Cube 0-5 ppm
|
Molybdenum Test: Hach Color Disc High Range
|
Copper Test: Hach Color Disc Free Copper - 100 tests
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Free & Total Chlorine Test Kit, Model CN-70 with Color Disc Method - The
most widely used disinfectant for drinking water, chlorine is also
important for sanitizing swimming pools, cooling towers, other
industrial equipment, and in the treatment of municipal wastewater. Its
measurement and control are vital for both safety and economic reasons. - Chlorine
test kits containing DPD colorimetric reagent are used most often for
monitoring potable water, swimming pools, and waste effluent. Powder
DPD reacts with chlorine more quickly than tablet-form DPD, giving more
accurate results. Powder DPD also has a considerable advantage over
orthotolidine, a hazardous substance sometimes used as a chlorine test
reagent. - Chlorine Test Kits are manufactured by Hach Company to ensure compliance with stringent quality control standards.
- Approved by some states for potable water. Check with your regulatory agency.
|
Iron Test: Hach Color Disc 0.1-5 mg/L Fe
|
Iron Test: Hach Color Disc 0.2-10 mg/L Fe
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Iron Test: Hach Color Disc 0.002-1 mg/L Fe
|
pH Test Kit: Hach Color Disc 5.5-8.5 pH
|
pH Test Kit: Hach Color Disc 6.5-8.5 pH (Phenol Red)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
pH Test Kit: Hach Color Disc 7.8-10.0 pH (Thymol Blue)
|
pH Test Kit: Hach Color Disc 4.0-10.0 pH (Wide Range)
|
Colorimeter, Reagent Set (DR/890 and DR/850): Iron
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Iron FerroVer Powder Pillows 0-3ppm 100/pk
|
Copper, Free & Total, Single Parameter Test Kit, Model: CU-6, Color-disc/Bicinchoninate, Hydrosulfite reduction
|
Molybdenum Test: Hach Color Disc Low Range
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bacteria Tests: Denitrifing Bacteria 9/pk
|
Bacteria Tests: Nitrifying Bacteria 7/pk
|
Colorimeter, Reagent Set (DR/890 and DR/850): pH
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Colorimeter, Reagent Set (DR/890 and DR/850): Chlorine Dioxide
|
Chlorine Dioxide, Single Parameter Test Kit, Model: CLD-2, Color Disc/DPD - Monitor
ClO2 levels on-site with the NEW Chlorine Dioxide Test Kit. The
Chlorine Dioxide Test Kit uses the reliable and EPA-accepted DPD method
to monitor ClO2 concentration, while eliminating chlorine interference
through the addition of glycine. With 100 test per kit and an available
range of 0-2 mg/L and resolution of 0.1 mg/L, operators can accurately
monitor around the 0.8 mg/L regulated limit.
- Use this kit as a cost-effective method for maintaining optimum chlorine dioxide levels in your plant.
- USEPA-accepted
for waste water and potable water. Approved by some states for potable
water under specific conditions. Check with your regulatory agency.
|
Test Strips: Chlorine Dioxide, 0-10 ppm
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Test Strips: Peracetic Acid 0-160 ppm
|
Test Strips: Peracetic Acid 0-50 ppm
|
Test Strips: Chlorine Dioxide, 0-500 ppm
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chlorine Test Strips - 5 types to choose from.
|
Test Strips: Hydrogen Peroxide, 1-100 ppm
|
Test Strips: Iron, 0-5 ppm
|
|
|
logo to enjoy free shipping within the 48 states on selected items throughout the store.